Massoth 8154501 eMotion M Locomotive Decoder

Very small 1,8 Amp Locomotive Decoder with 6 function outputs, suitable for small locomotives with one motor

The eMOTION M Loco Decoder is the smallest unit of the G scale series decoders.
This decoder is fully NMRA/DCC compatible.
It is ideal for retrofitting to a 4-lead motor block in exceptionally small G-Scale locomotives
as well as smaller gauges as H0 for example.
Maximum load capacity 1 Amps. 5 function outputs available.
The operation with an additional power buffer increases the dependability to a maximum. Brief track power interruptions will be bridged in analog and digital operation. Contaminated tracks and switch frogs will be passed without any speed changes or interruptions.

Features of the eMOTION M Loco Decoder:

• Loco decoder for digital and analog operation
• 14, 28 and 128 speed steps
• 1,2Amps motor output
• Output for a RC-Servo
• Bus-Interface for MASSOTH and LGB® modules
• Programmable driving curve
• Start, mid and maximum speed adjustable (incl. lag times)
• Serial and parallel data processing for all light and function outputs
• Control of parallel updated modules (LGB®)
• Digital and analog operation with automatic detection
• Compatible with NMRA DCC and LGB® MTS (all generations)
• Latest generation back-EMF (digital and analog)
• Adjustable motor frequency (70Hz - 16 kHz)
• 2 light outputs (front, rear) max. 0,5Amps each
• 5 functions outputs (2 x 0,3Amps each , 2 x 50mAmps each and 1 x 10mAmps)
• Dimmable light and function outputs, activatable in analog
• Programmable flashing light function and short term function
• Switching speed and lag times activatable with function key
• Easy function mapping with direction assignment
• All function outputs freely addressable (F1 to F16)
• Terminals for power buffer for smooth and steady operation integrated (Item No.: 8151001 or 8151501)
• Overload and thermal protection for motor and function outputs
• Reset function for all CV-values
• CV-reading
• CV-writing
• CV-writing bit-by-bit
• CV indirect programming (by register programming for old digital sytems)
• Direct register programming (CV 1 - CV4)
• POM - Programming-on-Main (Programming on main track)

Dimensions: 27 x 14 x 6,5 mm
Item-No.: 8154501
Delivery status: 
Manual: